Measuring Instructions

1. Measurements should be taken by a second person, meaning you should not measure your own feet.

2. The same thickness of sock should be worn during the measurement process that you would normally wear with these shoes.

3. Measurements should be taken standing with your weight balanced on both feet in a normal standing position.

4. Measurements ideally should be taken in centimeters. If a metric tape measure is not available inches can be used.

5. Use the navigation arrows to follow the steps through the measurement process.

Measurement 1 - The foot Outline

A. Using a pen, trace all the way around the foot on a white sheet of paper.

B. Make sure the pen is completely vertical during tracing.

Measurement 2 - The ball of the foot

A. Using a tailor´s measuring tape in centimeters, measure completely around the widest part of the foot.

B. Reference points are the bones behind the pinky toe and behind the big toe.

C. Mark the location on both sides of the outline of the foot where you placed the tape.

Measurement 3 - The Arch/Instep

A. Measure completely around the arch /instep of the foot.

B. Reference point is the bone on the top of the foot, roughly 2 inches (5cm) closer to the ankle from the location of the Ball of Foot measurement.

C. Mark the location on both sides of the outline of the foot where you placed the tape.

Measurement 4 - The Heel
For boots and ankle boots only

A. Measure completely from the heel around the top of the foot.

B. Reference point is where the foot bends.